Audio-Technica AT2035 vs Rode PodMic USB
A side-by-side look at Audio-Technica AT2035 and Rode PodMic USB for podcasters: pricing, features, and where each one wins.
Audio-Technica AT2035
A step up from the AT2020 with a pad, filter, and extra headroom
See site
Check price on Amazon
Rode PodMic USB
Dual-output dynamic with onboard APHEX DSP for direct-to-computer recording
See site
Check price on AmazonAt a glance
| Audio-Technica AT2035 | Rode PodMic USB | |
|---|---|---|
| Starting price | See site | See site |
| Free plan | No | No |
| Free trial | No | No |
| Best for | Podcasters stepping up from the AT2020 who want more control and headroom in one package | Solo podcasters who want a broadcast-quality dynamic mic without committing to an audio interface |
Key features
Audio-Technica AT2035
- Frequency response 20 Hz to 20 kHz
- Cardioid condenser XLR, requires 48V phantom power
- Switchable 80 Hz high-pass filter for rumble reduction
- Switchable -10 dB pad for high-SPL sources
- Custom shockmount included
- Self-noise 12 dB SPL
Rode PodMic USB
- 20 Hz - 20 kHz frequency response
- Integrated swing mount
- Dynamic cardioid, USB-C and XLR outputs
- Onboard APHEX DSP for USB path
- Zero-latency headphone output with level control
- Internal pop filter and internal shock mount
Pros and cons
Audio-Technica AT2035
Pros
- Built-in pad and high-pass filter add real-world flexibility
- Lower self-noise than AT2020 at 12 dB SPL
- Shockmount included - saves accessory cost
- Handles louder sources and varying room conditions better
Cons
- Requires a treated room - condenser sensitivity picks up ambient noise
- Requires 48V phantom power
- Sound character is similar to AT2020 - not a dramatic upgrade
Rode PodMic USB
Pros
- Plug-and-play USB-C plus interface-ready XLR in one mic
- APHEX DSP improves USB output quality meaningfully
- Headphone monitoring built in
- Same tight cardioid pattern as the original PodMic
Cons
- USB path is single-channel only - awkward for multi-host setups
- Slight price premium over the XLR-only PodMic
- Heavier than average, needs a solid boom arm
The verdict
Choose Audio-Technica AT2035 if
Podcasters stepping up from the AT2020 who want more control and headroom in one package.
The AT2035 is the AT2020 with the two features the AT2020 most needs - a high-pass filter and a pad. Those additions meaningfully expand the mic's utility for recorded music, interviews with varying source levels, and rooms where low-frequency rumble…
Choose Rode PodMic USB if
Solo podcasters who want a broadcast-quality dynamic mic without committing to an audio interface.
The APHEX DSP on the USB output is not just marketing - it adds real low-noise performance that standalone USB mics typically lack. You get the same tight cardioid pattern and internal pop filter as the original PodMic, plus headphone…